Minnesota Window Tint Laws [Updated 2021]

Minnesota Window Tint Laws: The Minnesota tinting laws were brought into existence in the year 1985. Ever since then the state of Minnesota like every other state has been very specific as well as strict with the laws they have made for its people. Various parts of the car have various percentage allowances for tints in Minnesota. Let us give you a gist of what you are going to be coming across further in this article, by introducing you to one of the rules in Minnesota besides the tint laws:

 No person shall drive or operate any motor vehicle with a windshield cracked or discolored to an extent to limit or obstruct proper vision, or, except for law enforcement vehicles, with any objects suspended between the driver and the windshield, other than sun visors and rear vision mirrors, or with any sign, poster, or other nontransparent material upon the front windshield, side wings, side or rear windows of such vehicle, other than a certificate or other paper required to be so displayed by law, or authorized by the state director of the division of emergency management, or the commissioner of public safety. 

You will come across all the possible information you need to know about the window tinting laws as well as the other rules and regulations to be kept in mind in the state of Minnesota in this article. 

Check out other States Window Tint Law :-

What Does VLT Mean According To The Minnesota State Law

VLT(Visible Light Transmission) is the light percentage allowed by the window tint film to travel through your car windows. Now the state of Minnesota like every other state has different legal allowable terms.

How VLT actually works is: THE HIGHER THE VLT THE MORE PROPORTIONS OF LIGHT IS ALLOWED TO PASS THROUGH THE WINDOW TINT FILM. Similarly, LESSER  VLT EQUALS TO  LESS PROPORTIONS OF LIGHT PASSING THROUGH THE WINDOW TINT FILM.

For instance: a 65% tint will allow only 65% of the light to pass through whereas a 5% tint will allow only 5% of the light to pass through.

Minnesota Tint Law- Legal Tint Limit For Passenger Vehicles

  • Front Windshield: No tint is allowed on the windshield.
  • Front seat side windows: up to 50% tint darkness allowed
  • Back seat side windows: up to 50% tint darkness allowed
  • Rear window: up to 50% tint darkness allowed

Minnesota Tint Law- Legal Tint Limit For Multi-purpose Vehicles

  • Front Windshield: No tint is allowed on the windshield.
  • Front seat side windows: up to 50% tint darkness allowed
  • Back seat side windows: Any tint darkness can be used
  • Rear window: Any tint darkness can be used

Window Tint Reflection In Minnesota

The state tint laws of Minnesota allow only a certain window reflection when it comes to using a tint. The window tints can reflect incoming light. They can also reduce really good proportions of glare and heat coming in through your car windows. 

Tint reflection for Passenger Vehicles:

  • Front side windows: must not be more than 20% reflective.
  • Back side windows: must not be more than 20% reflective.

Tint reflection for Multi-purpose Vehicles:

  • Front side windows: must not be more than 20% reflective.
  • Back side windows: must not be more than 20% reflective.

Other Minnesota Window Tint Law Rules And Regulations

  • Side mirrors: there are no restrictions for side mirrors in Minnesota.
  • Restricted colors: there are no restricted colors of tint in Minnesota.
  • Tint Variance: 3% variance allowed.
  • Certificates: the tint film manufacturers do not have to certify the film they sell in the state of Minnesota.
  • Stickers: there is a sticker required between the film and glass on the driver’s side window to identify legal tinting.
  • Medical Exceptions: for special tint Minnesota allows medical exemptions.
  • Windshield wiper: the windshield on every motor vehicle shall be equipped with a device for cleaning rain, snow, or other moisture from the windshield, which device shall be so constructed as to be controlled or operated by the driver of the vehicle.
  • Defrosting requirement: no person shall drive any motor vehicle with the windshield or front side windows covered with steam or frost to such an extent as to prevent proper vision.

Glazing material; prohibitions. 

A person must not drive or operate any motor vehicle required to be registered in the state of Minnesota upon any street or highway under the following conditions:

  • when the windshield is composed of, covered by, or treated with any material which has the effect of making the windshield more reflective or in any other way reducing light transmittance through the windshield;
  • when any window on the vehicle is composed of, covered by, or treated with any material that has a highly reflective or mirrored appearance;
  •  when any side window or rear window is composed of or treated with any material so as to obstruct or substantially reduce the driver’s clear view through the window or has a light transmittance of less than 50 percent plus or minus three percent in the visible light range or a luminous reflectance of more than 20 percent plus or minus three percent; or
  • when any material has been applied after August 1, 1985, to any motor vehicle window without an accompanying permanent marking which indicates the percent of transmittance and the percent of reflectance afforded by the material. The marking must be in a manner so as not to obscure vision and be readable when installed on the vehicle.

Leave a Comment